V680AC Charger

V680AC has an AUTO function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging that can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error for maximum safety. These can be set at users option. Special recharge plugs port for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc. It provides most convenient balance port for Lithium batteries, with separated 2,3,4,5,6 charge port, and external reverse connector.

High-power and high-performance circuit
V680AC employs the circuit that has maximum output power of 80W. As a result it can charge or discharge up to 15 cells NiCd/NiMH and 6 series of Lithium batteries with maximum current of 6.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program.Individual voltage balance for Lithium batteries inside V680AC as an individual-cell-voltage balancer inside. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage balancing.

Balance individual cells on discharge
V680AC also can monitor and balance individual cells of the Lithium battery pack during the discharge progress. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

Suitable for various types of Lithium batteries
V680AC can accept three types of Lithium batteries-Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer Warnings and safety notes section.Lithium battery Fast and Storage mode
You can charge Lithium battery for special purposes. Fast charge reduces the charging time of Lithium battery and Storage mode controls the final voltage of the battery to be suit for long time storage.

Maximum safety
Delta-peak sensitivity: the automatic charge termination program works on the principle of the Delta-peak voltage detection.
Auto-charge current linit: when charging Nicd or NiMH at AUTO current mode, you can set the upper limit of charge current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in AUTO mode.
Capacity limit: the charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Temperature limit:The temperature of the battery on charging will rise by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has reached.
Processing time limit: you can also restrain the maximum process time to prevent from any possible defect.
Input power monitor: to protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.

Data store/load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting
Input Voltage: AC100-240V, DC 11-18V
Charge Power: Max. 80W
Discharge Power: Max. 10W
Charge Current Range: 0.1-6.0A
Discharge Current Range: 0.1-2.0A
NiCd/NiMH Battery Cell Count: 1-15Cells
LiPo/LiIo/LiFe Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2V-20V
Current Drain For Balancing LiPo: 300mA/cell
Data Storage: Max. 5 data of batteries
Weight: 640g
Dimension: 145*145*56mm
V680AC has an AUTO function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging that can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error for maximum safety. These can be set at users option. Special recharge plugs port for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc. It provides most convenient balance port for Lithium batteries, with separated 2,3,4,5,6 charge port, and external reverse connector.

High-power and high-performance circuit
V680AC employs the circuit that has maximum output power of 80W. As a result it can charge or discharge up to 15 cells NiCd/NiMH and 6 series of Lithium batteries with maximum current of 6.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program.Individual voltage balance for Lithium batteries inside V680AC as an individual-cell-voltage balancer inside. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage balancing.

Balance individual cells on discharge
V680AC also can monitor and balance individual cells of the Lithium battery pack during the discharge progress. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

Suitable for various types of Lithium batteries
V680AC can accept three types of Lithium batteries-Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer Warnings and safety notes section.Lithium battery Fast and Storage mode
You can charge Lithium battery for special purposes. Fast charge reduces the charging time of Lithium battery and Storage mode controls the final voltage of the battery to be suit for long time storage.

Maximum safety
Delta-peak sensitivity: the automatic charge termination program works on the principle of the Delta-peak voltage detection.
Auto-charge current linit: when charging Nicd or NiMH at AUTO current mode, you can set the upper limit of charge current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in AUTO mode.
Capacity limit: the charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Temperature limit:The temperature of the battery on charging will rise by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has reached.
Processing time limit: you can also restrain the maximum process time to prevent from any possible defect.
Input power monitor: to protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.

Data store/load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting
Input Voltage: AC100-240V, DC 11-18V
Charge Power: Max. 80W
Discharge Power: Max. 10W
Charge Current Range: 0.1-6.0A
Discharge Current Range: 0.1-2.0A
NiCd/NiMH Battery Cell Count: 1-15Cells
LiPo/LiIo/LiFe Battery Cell Count: 1-6 Series
Pb Battery Voltage: 2V-20V
Current Drain For Balancing LiPo: 300mA/cell
Data Storage: Max. 5 data of batteries
Weight: 640g
Dimension: 145*145*56mm

PLEASE NOTE THIS ITEM IS STOCKED UPON REQUEST, PLEASE EMAIL US TO ENSURE STOCK IS AVAILABLE.